Re: [Chrysler300] Advice on engine repair
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] Advice on engine repair

Must use a high zinc content oil, not synthetic.
Sent: Tuesday, March 08, 2016 1:00 PM
Subject: Re: [Chrysler300] Advice on engine repair

Quick question…at this cost of $9,000 to $10,000 for an engine rebuild is it recommended to run a synthetic oil like Mobile One in these 413 engines?  An engine rebuild could be half the value of my 300K.  What do other members run?  

Thanks,  Mark

Mark G. Miller, General Manager
Arthur L. Davis Publishing Agency, Inc.
ph. 800-626-4081 ext. 1303  cell 319-240-8083
f. 319-277-4055


On Mar 8, 2016, at 2:29 PM, Matt Allyn allynentertainment@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:
I paid $3,500 to have one of my 413's done last year.
Plan to pay the same for another 413 to be done this year.
I also have paid $3,500 to rebuild a late 40's Ford Flathead last year; and that was with modern pistons, rods & a stroked crankshaft.
Matt Allyn

On Tuesday, March 8, 2016 11:33 AM, "Michael Moore mmoore8425@xxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

Did you do the assembly and disassembly your self?
I might expect to see pistons  a big chunk of a  $1000 bill for a 413, pin fitted etc. 
Mike Moore
On Mar 8, 2016, at 10:59 AM, LUCKYL46@xxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

i think it depends on wear you live. in NY i paid 3.000 for a complete rebuild. with machine work on a 383, and all new parts except pistons. just built a 454 Chevy 550 hp for  5.500     joe luciano   62 sport convt



Posted by: "Gary Nelson" <gnelson@xxxxxxxxxxxx>

To send a message to this group, send an email to:

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to

For list server instructions, go to

For archives go to


Home Back to the Home of the Forward Look Network Archive Sitemap