I went with the aluminized exhaust system kit from Waldron. I had a few small issues with fit. The bypass tubes and front pipes had to be re-bent slightly and the tailpipes are not quite bent correctly, they don’t have the slight upward angle prior to the final bend of the exhaust exit. They tend to hand a little low and scrape leaving the driveway. My original hangers were still good. Did not need them from Waldron’s. However I did buy a set of hangars for my Imperial from Waldron’s. They worked very well.
Anyone used the exhaust system kit for the 300F from Waldron's? Did you go aluminized or stainless? Anyone bought their reproduction hangers?
Posted by: "Scott Tozzi" <toz@xxxxxxxxxxxx>
To send a message to this group, send an email to:
To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit
For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang