Re: [Chrysler300] 300H engine mounts
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] 300H engine mounts





Hi Carlton,
I purchased a new set from Imperial Services 12 or so years ago.
I also have a large assortment of H parts that I no longer need - let me know if I can help.
Doug Warrener


From: "'Carlton Schroeder' schroe99@xxxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>
To: "Chrysler300" <chrysler300@xxxxxxxxxxxxxxx>
Sent: Monday, April 18, 2016 9:01:09 AM
Subject: [Chrysler300] 300H engine mounts

 

Hello,

Recent progress has been very modest on my H restoration, but my ambitions are sky-high for this work season.

I either need to get my ‘floating power’ engine mounts rebuilt (I’m not too keen on the John Hertog rebuild method) or replaced, or use a different style mount.

Has anyone tried the conversion mount available through the source below?

I’m waiting to check again with them, but I think the 62 B-Body B/RB Adaptor Brackets (about 2/3 the way down the page) may be another alternative.  The actual ‘insulator’ is simple and readily available.  If the rest of the adaptor kit fits and attaches OK it seems like a good alternative approach, if you don’t care about originality.

Thanks for all help,

Carlton Schroeder

Eagle River (with just a handful of remaining snow piles around here)

 

http://engine-swaps.com/Pages/ProductsType/EngConvKits.html

 




__._,_.___

Posted by: 2HsandaHeritage@xxxxxxxxxxx


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang





__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap