Re: [Chrysler300] 300G Parts Wanted
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] 300G Parts Wanted





If i had seen this before trying for the Holland meet, could possibly have helped. I stopped at Al's Auto Parts just east of Moorehead, Mn. Al was the dad, Randy runs the place now. There is at least 1 '61 chrysler there as i got a turn signal switch from it, but didn't look at the rear. The yard is pretty overgrown, but a lot of cars there. I always pick my own, but he likely removes parts for you. Number is 218-498-2797. Central time zone. Good luck.

Sent from my iPad

On May 24, 2016, at 8:22 PM, cv300g@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 

I am searching for the following for my 300G.


The long straight Stainless Steel trunk moulding. Its the upper moulding that runs from tail light to tail light. I would like to find one that is Dent FREE and Not Bent..


I also need the grille Horizontal Bars that are in excellent condition or ones that are not broken and pit-free that I can have re-chromed.


Please contact me with what you have.


Thanks and have a great day  !!!


Charlie Valentine



__._,_.___

Posted by: Lindsey <lindsey@xxxxxxxxxxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang





__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap