[Chrysler300] Starting Problem !!!
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Chrysler300] Starting Problem !!!





I am wondering if anyone else has had this problem and what your solution was.


This morning I started the62 300 sport and it cranked and fired right up. I took a short drive  for about 10 to 15 minutes, came home , shut off the car. Right away I went to start it again and nothing at all. Didn't click, didn't turn over. This was around 9:00 AM.


I turned the key to Run, opened the hood and put a screwdriver between the 2 terminals on the Starter Relay. The car started right up.

The Ignition Switch, the Starter Relay and the Starter all worked fine on the first start. Which one was likely to fail on my attempt to restart ? What causes the component to work, not work, work again, not work ?

I was busy all day so the car sat all day. A few minutes ago ( 5:40 PM ) I went out and it cranked and started right up. If I take a drive it will probably do it again. It did the exact same thing yesterday.


Any tips and or suggestions on fixing this intermittent problem ?


Bye for now and Happy fathers Day !!!!!


Charlie Valentine



__._,_.___

Posted by: cv300g@xxxxxxxxx


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang




Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use

__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap