RE: [Chrysler300] 300K wiring diagram
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Chrysler300] 300K wiring diagram

The switch is closed (allowing the power to pass). The problem is we have Low power. That pressure switch is either open or closed.


Hugh Baldus



From: Mark Souders [mailto:mrs954@xxxxxxx]
Sent: Wednesday, June 22, 2016 1:37 PM
To: Hugh Baldus
Subject: Re: [Chrysler300] 300K wiring diagram



Did you check the low pressure switch? Not sure if the 64 has one, my 62 does not, but my 73 Dart does. You can test it by unplugging it and putting a jumper wire across the two terminals, turn on the AC and see if the clutch turns.






-----Original Message-----
From: Hugh Baldus hugh@xxxxxxxxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx>
To: yahoogroups <chrysler300@xxxxxxxxxxxxxxx>
Sent: Wed, Jun 22, 2016 1:12 pm
Subject: [Chrysler300] 300K wiring diagram


Good Afternoon,


Can anyone advise where to find the wiring diagram for a 300K online, if such exists?  Tracking a failure between A/C dash controls and the unit, it works when powered directly, but doesn’t spin when connected to dash lead.  Worked one day, not the next.  Thanks-


Hugh Baldus




Posted by: Hugh Baldus <Hugh@xxxxxxxxxxxxxxxxx>

To send a message to this group, send an email to:

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to

For list server instructions, go to

For archives go to


Home Back to the Home of the Forward Look Network Archive Sitemap