Hi Ed,I had a hard time twice with cooper tires; one new set in particular circa 2010 was the root cause of an elusive 60 + vibration that was chased for a year , thought to be hub and drum run out , balance etc . " tires are fine" Changed everything , eventually even spindles . ( diagnosed as "bent spindle" ? in desperation . Tires were balanced ok , ran in the machine ok , but one day I noticed on my own (!) the front of car moving up and down slightly while driving very slow . Tires were out of round , (!!!!), all of them !! but apparently can be still balanced ?? . Coopers were / used to be reasonable tires ( state police used them , might have been made in mass way back) but I think now just a brand name bought by someone in Asia . Beware . Check roundness if a dance starts .Just me --and I do not like the black wall look , but I stay Michelin now , for cars I drive , except "restored 300 " where look matters a lot . Michelins Worth every cent . Never had a problem ; usually need no weights . Perfect tires . Outlast other tires 2x, ( especially Goodyear best high end.. Michelin literally go 3x Eagles )!so not such a bad deal !! Keeping tail intact is job 1 . Diamond back was supposed to add white walls to Michelin carcass ? Rumored ?Did you find that physical tire size place on net ? Even Michelin does not tell you the detailed full physical sizes of their tires , drives me crazy . Only listed by cars they fit ---in their own data base . Dumb .I too hear good things about Hankook and Nitto . Had ? Sp Kuhmo ? Side wall failure at speed ; Firestone too . Do not need this .Sent from my iPhone
On Sep 24, 2016, at 12:35 PM, EMills_ATC millserat@xxxxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@yahoogroups.com > wrote:According to the Cooper Tire internet site, there are several sizes of the Trendsetter still made in whitewall, including the P235/75R15. You might check the site for a dealer near you or just have your dealer double check. Ditto the Mastercraft AS-IV and several other Trendsetter clones made by Cooper. Just make sure the date code is fresh as there are not that many whitewalls sold.
Having said that, a more direct answer to your question about the Hankook, I like them and have had no issues with them in the P215/75R14, P225/75R15 or P235/75R15 narrow whitewall sizes. The P235/75R15 Hankook Optimo H724 are also extra load (XL = 108S = 2183 lb) vs most others including the Cooper which are 105S = 2028 lb rating. At a given pressure, load ratings are same, but you can run the XL tires at higher pressure if needed.
The H724 are slightly taller but my recollection is the Coopers and Mastercrafts tend to run on the small side compared to older tire specifications. The P235/75R15 H724 shows at 28.9 in OD with 9.3 Section Width and 5.8 Tread Width on a 6.5 inch rim. The Cooper Trendsetter SE shows 28.65 in OD with 9.1 Section Width and 5.9 Tread Width on 6.5 inch rim.
Don't know how much of a hurry you are in, but best prices I have found are Discount Tire on eBay - they generally have a $50 to $100 rebate and free shipping around holidays, but even without sale, they are comparable to Amazon.com and cheaper than dealers. This assumes you can get mounted locally.
The Hankooks I have gotten from both Amazon and Discount Tire have been fresh - some made in Korea - others in Indonesia. Best price I have gotten (after rebate) is in $60-70 per tire range - or $80-85 without rebate.
I don't think you will go wrong either way just stay away from the Chinese made tires.
Best, Ed
Edward Mills Antique Tractors 1930-1960 Antique Cars 1960-1985On 9/23/2016 9:11 PM, 2HsandaHeritage@xxxxxxxxxxx [Chrysler300] wrote:
I have a set of 10 year old Coopers with less than 4K miles on them on my H.Cooper no longer produces the "Trendsetter" narrow white wall in the 235/75R/15 size.
Hankook does - anyone had experience with them?
Any other suggestions?
Thanks,
Doug Warrener
__._,_.___
Back to the Home of the Forward Look Network
Archive Sitemap