Re: [Chrysler300] More stuff needed
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] More stuff needed

I know the hardware is different, but the tips may well be the same.

Sent from my iPhone

On Oct 6, 2016, at 6:34 PM, 'Rich Barber' c300@xxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:


Thanks, Gentlemen:


Gary’s catalog shows two different tips, both for ’60-’62.  I’ll take a look at Legendary’s offering, although it seems they may have been the ones claiming 1964 HT & Conv. visors were the same.  Not sure of which vendor—just something to watch out for.  I was able to buy a good used set of visors for our Konv in wrong color and sprayed them black. 


Rich Barber


From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of Don Cole mr300k@xxxxxxxxx [Chrysler300]
Sent: Thursday, October 06, 2016 3:22 PM
To: Noel Hastalis <cpaviper@xxxxxxxxxxx>
Cc: Rich Barber <c300@xxxxxxx>; pffkllc@xxxxxxx; chrysler300@xxxxxxxxxxxxxxx
Subject: Re: [Chrysler300] More stuff needed



Legendary has them. Just ordered replacement visors for my K and they offered them.

D. Cole

Sent from my iPhone

On Oct 6, 2016, at 5:33 PM, Noel Hastalis cpaviper@xxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:


Got my plastic tips from Gary Goers a few years ago.


Sent from my iPhone

On Oct 6, 2016, at 4:20 PM, 'Rich Barber' c300@xxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:




Be sure to note that the hardtop and convertible visors and hardware are different.  A vendor tried to convince me otherwise, but they have different dimensions.  The hollow plastic tips get brittle and broken after 50 years + and I searched widely for an appropriate replacement from other stuff, like tubing.  Anyone found a suitable replacement for the little plastic tubes?


Rich Barber

Brentwood, CA


From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of pffkllc@xxxxxxx [Chrysler300]
Sent: Thursday, October 06, 2016 10:08 AM
To: chrysler300@xxxxxxxxxxxxxxx
Subject: [Chrysler300] More stuff needed



Hi Group:


    I am looking for the channel that holds the boot for Anne's K convert.  This piece attaches to the back of the rear seat.  I also need the visor hardware along with the plastic tips, for the K convert.  We scavenged the ones from our other convert and now have to replace them.




Pete Fitch


Posted by: Peter Fitch <pffkllc@xxxxxxx>

To send a message to this group, send an email to:

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to

For list server instructions, go to

For archives go to


Home Back to the Home of the Forward Look Network Archive Sitemap