Re: [Chrysler300] 1961 G restoration
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] 1961 G restoration





I agree these cars had acrylic
Enamel with a light orange peel.
These over restored clear cote paint ed cars look nothing like original.
Just my opinion.
Sent from my iPhone

On May 24, 2017, at 7:57 PM, Ryan Hill ryan_hillc300@xxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 

Jim, I'm sure this will stir up some controversy but you used the word 'restore', so if you are truly going to restore the car, I don't think you could consider a two-stage paint. A single stage urethane enamel will give you the most authentic look (especially if you resist color sanding and polishing). 


If your definition of a restoration leaves room for changes to the original car that may include brake upgrades, tire/wheel changes, electronic ignition, chrome valve covers, aftermarket audio equipment etc. , then perhaps having your body man work extra hard at leveling out the panels, adjusting gaps, and applying a deep glossy two-stage finish followed by color sanding and polishing might be more what you're after. You need to decide what you want to end up with and how much you want to spend before you get too deep into it. 


My thought is, with 300's, originality is what usually brings the money and gets the awards and accolades. If you get the body & paint right by getting it close to original with a single stage paint, you can either go all out and do everything 'correct' bow to stern or you can add your own non-original touches as you see fit; things that can be undone in the future by yourself or others, should you ever sell the car. 


I'm baffled by restorers who must have all the correct clamps, ignition wires, paint markings, exhaust hangers (you name it) and then spend a ton of cash perfecting the originally very imperfect body and paint..... and put on a set of radials.  In the end you just have to do what makes you feel good about your car.




From: Chrysler300@xxxxxxxxxxxxxxx <Chrysler300@xxxxxxxxxxxxxxx> on behalf of Jim Rhoades jrhoades47@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx>
Sent: May 24, 2017 10:10 AM
To: yahoogroups
Subject: [Chrysler300] 1961 G restoration
 
 

Hi group, We are finally going restore our G after all these years. So I am going to have a lot of questions to the experts in the club. I've got the engine and transmission and complete interior out of the car and almost ready for paint. The white paint on the car now is probably lacquer or enamel I'm not to familiar with the kinds of paint but I have heard of base coat clear coat. What kind of paint would you guys recommend?
Thanks Jim Rhoades Pueblo Co

Sent from my iPad



__._,_.___

Posted by: scooter465@xxxxxxx


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang





__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.