Re: [Chrysler300] Ram K brake pedal
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] Ram K brake pedal

Hi , 
Do not know about ramK due to complexity of hydroboost behind this question ; probably work either way, but only one is factory right . But on manual brakes without hydroboost the master is higher not lower , as top pivot is fixed. 
to get more pressure for a given bore , you raise it . It is almost 2:1 different in 60's F / dodge etc 

Sent from my iPhone

On Jul 12, 2017, at 12:46 AM, leslie miklas ldmiklas@xxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

Quick question:

I used to know the answer to this but have forgotten...(Insert old age joke here)

The 64 300s with manual brakes used a different (lower) hole location to attach the master cylinder pushrod to the brake pedal as well as a different firewall support plate than the power brake equipped cars.

My question: Do the Ram Ks  use the MANUAL  brake pedal  pushrod position and related support plate ?

I assume they do ! 

Thanks !

Jeff Miklas - Ldmiklas@xxxxxxxxxxx


Posted by: John Grady <jkg@xxxxxxxxxxxxxxxxx>

To send a message to this group, send an email to:

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to

For list server instructions, go to

For archives go to


Home Back to the Home of the Forward Look Network Archive Sitemap