Re: [Chrysler300] Ignition Timing
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] Ignition Timing

A and B blocks are opposite ,that  has caught more than one person .( firing order / plug wire location, drawing of cap ) . I would assume early hemi same as A block , but do not know for sure.  But the way engine acts when you twist it will tell you . Watch out for stretched chain too as to why it would change . 

Sent from my iPhone

On Jul 27, 2017, at 4:38 PM, 'Rich Barber' c300@xxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

As the rotor turns counter-clockwise during operation, one must turn the distributor body clockwise to advance the spark.  Previous posts suggest it is not always proper to accept the timing marks on the crankshaft due to possible rotational shift of the vibration balancer.




From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of pennsy300@xxxxxxx [Chrysler300]
Sent: Thursday, July 27, 2017 5:47 AM
To: chrysler300@xxxxxxxxxxxxxxx
Subject: [Chrysler300] Ignition Timing



Which way (clockwise or counter clockwise) should I turn the distributor to advance the ignition timing on my 300F?  Terry McTaggart


Posted by: John Grady <jkg@xxxxxxxxxxxxxxxxx>

To send a message to this group, send an email to:

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to

For list server instructions, go to

For archives go to


Home Back to the Home of the Forward Look Network Archive Sitemap

Copyright 2018 The Forward Look Network.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.