Re: [Chrysler300] 61 300G
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] 61 300G





Another question for the experienced!
 
300G,  Is there any way to view the engine ID numbers on AC cars without removing the compressor/brackets?  Is there engine ID stamps anywhere else on the block?
 
Also is there any way you can move a power driver seat when the switch isn't working?  I wouild like to move the seat back manually if possible.
 
Thanks for all the help so far.
 
Mike 300G
----- Original Message -----
Sent: Saturday, August 26, 2017 7:47 PM
Subject: [Chrysler300] 61 300G

 

Hi All,
 
Now that I've sold my 61 Corvette my 61 300G gets all the attention!
 
Questions
 
1. What width size whitewall did the 300G come with?  I'm planning on buying Coker radials, The stock size was 8.00 - 15.  Would that equate to 225 70R-15?
 
2. I also need to do the brakes from stem to stern.  I was going to use NAPA for most of the parts.  Comments?  Recommendations?  Has anyone used s/s brake lines from Good Brakes or Brake Hoses Unlimited on EBay?
 
Thanks,
Mike  300G Barn Find



__._,_.___

Posted by: "Michael Ashmore" <michael.ashmore@xxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang





__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap