RE: [Chrysler300] 61 300G
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Chrysler300] 61 300G

Yes, it is set up for the cast iron torque converter; it projects a different distance, not just the bolt pattern, I believe . last year of 58-61 B block crank; 62 up interchange , 727


From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of 'Richard Vitek' rpvitek@xxxxxxxxxxxxx [Chrysler300]
Sent: Tuesday, September 05, 2017 2:13 PM
To: Chrysler300@xxxxxxxxxxxxxxx
Subject: [Chrysler300] 61 300G


Is the crankshaft on the G's 413 a different part number from subsequent 413's? I am referring to the 8 (?) bolt flange and apparent lack of a flex plate. Thank you.


Posted by: "John Grady" <jkg@xxxxxxxxxxxxxxxxx>

To send a message to this group, send an email to:

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to

For list server instructions, go to

For archives go to


Home Back to the Home of the Forward Look Network Archive Sitemap