Re: [Chrysler300] 300 K motor mounts

["Dave Dumais dave.dumais@xxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

AL,

I traded with now and then , had to send first set back

The rubber  mounts  shook mighty 413 at fast idle

Second set worked fine.

DD

On Wednesday, April 15, 2020, 08:21:41 PM EDT, Jamie Hyde jamie.hyde@xxxxxxxxxxxxx [Chrysler300] <chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 

Look at the Enews #47 that show the images of my mounts rebuilt, they were fast, less than 2 weeks, the repops are $683 a set plus shipping.

 

 

From: Chrysler300@xxxxxxxxxxxxxxx <Chrysler300@xxxxxxxxxxxxxxx> On Behalf Of ALLAN POZDOL apozdol@xxxxxxxxxxx [Chrysler300]
Sent: Wednesday, April 15, 2020 7:23 PM
To: chrysler300@xxxxxxxxxxxxxxx
Subject: [Chrysler300] 300 K motor mounts

 

 

Thanks again, Bob Merritt for the pointer to check the motor mounts regarding my trouble removing the oil pan.

 

LH mount broke and sunk, RH is cracked on both sides. Plan L begins!

 

Can I ask for advice and comments as to rebuilding with Then and Now, or has anyone used any of the urethane repops?

 

Might anyone have some cores I could send if need to Then and Now be to hasten turn around time? I will send you mine to replace them. I would rather not leave the motor suspended for weeks on the lifts' cylinder alone.

 

Onward!

 

Al

__._,_.___

---

Posted by: Dave Dumais <dave.dumais@xxxxxxxxx>

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___