{Chrysler 300} '55 300 coil wiring question
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

{Chrysler 300} '55 300 coil wiring question



Hello all,

 The '55 Windsor factory diagram available online for the 6 volt positive ground system shows the + wire from the coil going to the distributor. My handy-dandy $25 color wiring diagram from ClassicCarWiring.com shows the - lead of the coil going to the distributor. And unfortunately, there isn't a diagram in the shop manual. I could check other diagrams, but they are for 12 volt negative ground, I don't know if that makes a difference with coil wiring.

 I'm more inclined to believe the factory diagram, but can anyone tell me which is correct? I would not believe how my car is wired knowing the idiots that owned it before me.

Thanks,

Jim

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/BYAPR03MB3591E921C92DBE2B4B4C2055820E9%40BYAPR03MB3591.namprd03.prod.outlook.com.

Attachment: 55 Chrysler-wiring.pdf
Description: 55 Chrysler-wiring.pdf

Attachment: CCW diagram.jpg
Description: CCW diagram.jpg



Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.