
Re: 65 Belvedere, S6 cooling issue.
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: 65 Belvedere, S6 cooling issue.
- From: Gary Pavlovich <glpavlovich@xxxxxxx>
- Date: Fri, 21 May 2010 19:10:20 -0700
Mike,
Yes, I have a six blade and a seven blade fan for HD air pull/cooling.
Just send me an e-mail off-line and I will send you pictures of each; take
your pick.
Gary Pavlovich
----- Original Message -----
From: "Mike and Linda" <miclinmopar@xxxxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Friday, May 21, 2010 3:36 PM
Subject: Re: 65 Belvedere, S6 cooling issue.
Anyone have a 6 blade fan kicking around??????????
Mike
----- Original Message -----
From: "Ollie" <satellite1965@xxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Friday, May 21, 2010 8:38 AM
Subject: Re: 65 Belvedere, S6 cooling issue.
Mike,
Couple questions..are you using a after market temp gauge or just the
original dash gauge? I would verify the temp with a good gauge....I
remember last summer we fixed my buddies Chevy overheating problems by
trashing the cheap aftermarket gauge replacing with a autometer gauge.
Change the fan to a 6 blade...used in AC cars
I would not think u would need a shroud on a /6 with no air.
Radiators get price scary. You can almost get a custom built aluminum
radiator for a copper core rebuild.
Ollie
----- Original Message -----
From: "Mike and Linda" <miclinmopar@xxxxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Thursday, May 20, 2010 9:36 PM
Subject: 65 Belvedere, S6 cooling issue.
I only have a few miles on the car since buying it. I'm just trying to
build up some confidence in it. After my first 20 mile run, the eng.
seemed to run hot, so I replaced all the hoses, waterpump and put in a
new 180 deg. thermostat. The radiator shop cleaned the radiator a fixed
a few leaks that popped up after cleaning, but said it fragile.
Currently, no leaks. I went to install a clutchfan, but its 3' tall and
hits the radiator - so I had to reinstall the measly 4 blade. No shroud
unfortunately....
No one makes and aftermarket on for this year. I don't want to pay big
bux for a recore either. Is there another application that would fit?
One that maybe has a similar hose layout and provision for a shroud?????
thanks
----
Please address private mail -- mail of interest to only one person --
directly to that person. I.e., send parts/car transactions and
negotiations as well as other personal messages only to the intended
recipient, not to the Clubhouse public address. This practice will
protect your privacy, reduce the total volume of mail and fine tune the
content signal to Mopar topic. Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and
----
Please address private mail -- mail of interest to only one person --
directly to that person. I.e., send parts/car transactions and
negotiations as well as other personal messages only to the intended
recipient, not to the Clubhouse public address. This practice will
protect your privacy, reduce the total volume of mail and fine tune the
content signal to Mopar topic. Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and
----
Please address private mail -- mail of interest to only one person --
directly to that person. I.e., send parts/car transactions and
negotiations as well as other personal messages only to the intended
recipient, not to the Clubhouse public address. This practice will protect
your privacy, reduce the total volume of mail and fine tune the content
signal to Mopar topic. Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and
----
Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
Back to the Home of the Forward Look Network