Re: Will this Work on my 64 Fury?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Will this Work on my 64 Fury?



Yes that is a good option.

That 66-70 piece would probably require a lot of mods by a similarly-talented metal fabricator, if it could be made to work at all for a reasonable cost. 

Did you try finding a cowl patch at an old-timey junkyard? I guess Most of them are probably are rusty too though, unless in a dry desert area. (Terrible design by Chrysler Corporation!) 

I remember years ago a guy in a local Mopar club here needed some item for his restoration and ended up having to buy a whole parts car to get that item, then selling the parts car or parting it out (can't recall which). The joys of restoring old Mopars versus easy parts gathering for F*rd and Che*y. :)

Thanks,
Gary H.    
 

>  -------Original Message-------
 
>  Cut out the piece you want to renew and make or pay someone to make it
>  for you. There are metal workers all over the country/world that can
>  do such work. Look at what the shops on TV build!
>  
>  Mike
>  
>  On 10/21/2022 9:46 PM, 'Larry Ashbaugh' via The 1962 to 1965 Mopar
>  Mail List Clubhouse wrote:
>  
>  > I have been trying to find a cowl repair (Drivers side) piece for my
>  > 64 Fury convertible without success. The rust is where almost 60
>  > years of rain trickled through and ate the wiper cowl bracket clean
>  > through. Now, the wiper just flops around and I cannot find anyone
>  > who carries the correct 64 repair bracket (I had one ordered through
>  > Kramer and then through Summit Racing, and both gave up getting the
>  > stamping from Taiwan), so I am getting somewhat desperate for
>  > something that will adapt...
>  >
>  > That is why I am looking at similar stampings of other B-Body
>  > Mopars, or other ideas...
>  >
>  > Larry
>  >
>  > -----Original Message-----
>  > From: info@xxxxxxxxxxxxxxxxxxx 
 
>  > Hello!
>  >
>  > We know you can use the INNER FENDER TO COWL BRACKET - LOWER - LH -
>  > 66-70 B-BODY, so go ahead and treat yourself! We know you won’t be
>  > disappointed!
>  >
>  > ---
>  > Thanks Again!
>  > Auto Metal Direct
>  > WWW.AUTOMETALDIRECT.COM
>  >
>  > Inner Fender to Cowl Bracket - Lower - LH - 66-70 B-Body
>  >
>  > $79.99
>  >
>  >  

-- 
-- 
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
--- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/1962to1965mopars/20221022210448.35671.qmail%40server309.com.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.