RE: Sig Erson Mopar cam and poly heads

[Sean Bolter <bolterman@xxxxxxxx>]

[AD removed for archives]
-------------------------------------------------------------------
Need a Laptop? Get a Sony Vaio Laptop Free!
caadAcrbOyW3Na/ProductTestPanel
-------------------------------------------------------------------

Gary, what does BMEP mean?

Thanks,

Sean Bolter


Gary Pavlovich wrote:
> 
> Ken,
> You are correct.  The Poly could use a more efficient camshaft to take 
> advantage of the higher BMEP in the chamber.  The Poly BMEP is slightly 
> less 
> than the HEMI and far more than the wedge.
> The Poly does not need the higher head flow volume as do wedges because 
> it 
> need not be "over-engineered" to compensate for the less-efficient wedge 
> 
> chambers.
> Our "Race Poly" will bear some surprising numbers vs. the wedge engines 
> with 
> much less camshaft and cubic inches.
> Gary Pavlovich
> ----- Original Message ----- 
> From: "Westerlund, Ken" <kwesterlund@xxxxxxxxxx>
> To: <1962to1965mopars@xxxxxxxxxx>
> Sent: Thursday, June 16, 2005 5:47 AM
> Subject: RE: Sig Erson Mopar cam and poly heads
> 
> 
> [AD removed for archives]
> -------------------------------------------------------------------
> FREE Zoobooks Elephants ISSUE and tiger POSTER!
> Is your child reading? Zoobooks is guaranteed to improve
> your child's reading skills. Click below to sign up now!
> caadCUzb7MlEoa/Zoobooks
> -------------------------------------------------------------------
> 
> I should think that a special grind would be needed to take advantage of
> the semi-hemi engine.  If a cam is just a cam, why not just use a chevy
> grind?  I should think the semi-hemi would be less prone to detonation
> and could use a cam that built more cylinder pressure?  I am no cam
> expert, but with the talk about cams designed for fords and chevies, the
> Poly head is FAR more exotic than a chevy head.
> 
> Ken
> 
> 
> -----Original Message-----
> From: Gary Pavlovich [mailto:glpavlovich@xxxxxxx]
> Sent: Wednesday, June 15, 2005 5:56 PM
> To: 1962to1965mopars@xxxxxxxxxx
> Subject: Re: Sig Erson Mopar cam
> 
> Schuyler,
> My Sig Erson would work well in a built Poly as do all the small block
> grinds; however, you cannot use a LA cam in a Poly motor.
> Gary
> ----- Original Message ----- 
> From: "Schuyler Wrobel" <schuyler62@xxxxxxxxxxxxx>
> To: <1962to1965mopars@xxxxxxxxxx>
> Sent: Wednesday, June 15, 2005 12:32 PM
> Subject: Re: Sig Erson Mopar cam
> 
> 
> > just curious, would that Erson Cam work good in a Poly stroker or
> mildly
> > built Poly with just 'reworked heads'?
> > I guess what I'm trying to find out is does a cam have to be Poly
> > specific, or will any small block cam, solid lifter
> > or pump up, give the same results more or less.?
> > and thanks! as always for any info.
> > Schuyler
> > Schuyler 62 Dodge Dart 440 wagon w/ Poly 318
> >  <http://www.1962to1965mopar.ornocar.org/ml-wrobel62.html>
> > On Jun 15, 2005, at 8:05 AM, Gary Pavlovich wrote:
> >> ----------
> >>
> 
> [AD removed for archives]
> -------------------------------------------------------------------
> Need a new washer and dryer set? You could get one free!
> caadzTWb7MlEof/ProductTestPanel
> -------------------------------------------------------------------
> 
> ----
> Please address private mail -- mail of interest to only one person --  
> directly to that person.  I.e., send parts/car transactions and 
> negotiations 
> as well as other personal messages only to the intended recipient, not 
> to 
> the Clubhouse public address. This practice will protect your privacy, 
> reduce the total volume of mail and fine tune the content signal to 
> Mopar 
> topic.  Thanks!
> 
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.
> 
> 
> 

[AD removed for archives]
-------------------------------------------------------------------
Erase wrinkles without painful injections with Nexiderm SP.
Nexiderm SP is clinically proven to reduce wrinkles by 68% Click 
here to get your 30-day free supply.
caadAclbOyW3Nf/Nexiderm
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



bOyW3N.