Fwd: decoding VIN and fender tag

[shuntich@xxxxxxx]

  Bill and group: Thanks for the decoding work. Another member came to the same conclusions although you added a bit. The build sheet that I got in a folder of materials for this car appears not to be a build sheet for the Polara 500, but a parts car that the floors and engine were taken from. Although the engine is in a location some distance from me, it had a 2 brl. manifold and I believe that it is a 318. The question I have now is why did someone save this build sheet. Could it be because it had such a late date on it--0430 with 1962 printed on the top of the sheet. Does anyone know if April 30, 1962 was near the end of the 1962 model run? If so, that may explain why the sheet was saved. 
 Thanks again for your help.
 Rich
    
 -----Original Message-----
 From: wwatson5@xxxxxxxxx
 To: 1962to1965mopars@
 Sent: Thu, 11 Jan 2007 6:54 AM
 Subject: Re: decoding VIN and fender tag
 
  
5422103102
5 - Dodge V8
4 - Polara 500
2 - 1962 model year
2 - Hamtramck, MI plant
103102 - 3,102nd 1962 car off the line

 Under SO=0907
 Under NUMBER=0665
The two together form the Shipping Order Number.   "0907" is the scheduled
build date, September 7, 1961.

Under BODY=545 - Car Line - Engine / Series / Body Style
5 - Dodge V8
4 - Polara 500
5 - 2-door convertible

UnderTRM=855 - Interior Trim
85 - Seat style & material - Bucket seats, vinyl
5 - Colour - Red

 Under PNT=PP6U - Paint Colours / Styles
P - Roof Colour - Vermilion Red
P - Body Colour - Vermilion Red
6 - Convertible Top - Black
U - Sportsweep Colour - Copper

Chrysler put a "Roof" colour on the body tag even if the car was a
convertible.

Under the letter C=2 - Transmission
  342  : Torqueflite A-727
Under the letter G=5 - Heater
  385 : Heater with Defroster
Under the letter M=8 - Electrical Items
  428 : Windshield Washer - Dual jet

The engnine code would be under the letter "N".  When no code was placed
there, the car had the standard engine.  In the case of the Polara 500, that
would be a 361-cid V8.

Also, on the build sheet there is 3 for axle ratio and 57 for engine.
Axle ratio "3" : 533 : 3.23:1

Engine : "57" : the last two digits of either the part number or 'bin'
number used to help workers on the assmbly line quickly retrieve such items
as brakes, springs, engines, etc.
My parts book (Canadian) does not show an engnine with a part number ending
with "57"   It shows the 361 ending with "58".

Bill
Vancouver, BC





------------------------------

Date: Tue, 09 Jan 2007 18:45:03 -0500
From: shuntich@xxxxxxx
Subject: decoding VIN and fender tag




 Group: Can anyone decode the following about my 1962 Dodge?


 VIN=5422103102

 Here are the numbers from the fender tag:

 Under the letter C=2
 Under the letter G=5
 Under the letter M=8

 Under SO=0907
 Under NUMBER=0665
 Under BODY=545
 UnderTRM=855
 Under PNT=PP6U

 Also, on the build sheet there is 3 for axle ratio and 57 for engine.
 Thanks, Rich



------------------------------


----
Please address private mail -- mail of interest to only one person -- directly 
to that person.  I.e., send parts/car transactions and negotiations as well as 
other personal messages only to the intended recipient, not to the Clubhouse 
public address. This practice will protect your privacy, reduce the total volume 
of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 


   
________________________________________________________________________
Check Out the new free AIM(R) Mail -- 2 GB of storage and industry-leading spam and email virus protection.

[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

http:///u/?.. 
Or send an email to: 1962to1965mopars-unsubscribe@


http:///?p=