Re: Frame Connector Question

[Paul Hamaday <phamaday@xxxxxxxxx>]

The frame rail is welded to the floor, why shouldn't
the connector? If not, the weak point becomes the spot
welds between the front of the rear frame rail & the
floor panel.
Regards,
Hammer


--- Joeydahook9@xxxxxxx wrote:

> 
> 
> I'm finally putting in my bolt in frame connectors,
> which will be welded  
> after install.  There seems to be 2 schools of
> thought on whether to weld  them 
> to the floor or not.  Thoughts???  PS: The carpet is
> in....   Joe
> 
> 
> 
> ************************************** Get a sneak
> peek of the all-new AOL at 
> http://discover.aol.com/memed/aolcom30tour
> 
> [Non-text portions of this message have been
> removed]
> 
> 
> ----
> Please address private mail -- mail of interest to
> only one person -- directly to that person.  I.e.,
> send parts/car transactions and negotiations as well
> as other personal messages only to the intended
> recipient, not to the Clubhouse public address. This
> practice will protect your privacy, reduce the total
> volume of mail and fine tune the content signal to
> Mopar topic.  Thanks!
> 
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html. 
>
> 
> 
> 



       
____________________________________________________________________________________
Boardwalk for $500? In 2007? Ha! Play Monopoly Here and Now (it's updated for today's economy) at Yahoo! Games.
http://get.games.yahoo.com/proddesc?gamekey=monopolyherenow  


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.