Re: 4 bbl swap / Air Cleaner Interchange

[Gary Pavlovich <glpavlovich@xxxxxxx>]

Bill,
I have an original single snorkel four barrel air cleaner from an early AFB 
Chrysler/Dodge in very nice shape.  It will give you an "original" look.
I will send you a picture if you like.  E-mail me off-list and anyone else 
who might be interested.

Thank you,
Gary Pavlovich
----- Original Message ----- 
From: "Bill" <Y1TopBanana73@xxxxxxxxx>
To: "62-65 Mopar List" <1962to1965mopars@xxxxxxxxxx>
Sent: Monday, July 30, 2007 6:53 AM
Subject: 4 bbl swap / Air Cleaner Interchange


> Since I'm rounding up parts for my 4 bbl swap I'm trying to figure out
> what air cleaner I can use that will still look 'correct'. I found a
> couple on eBay for a 65 New Yorker 413 AFB, but I'm concerned with
> hood clearance. I'm gonna use an AVS or AFB if possible. Any thoughts?
>
> Also my 4 bbl adapter I got w/ my manifold turned out to be crap. It's
> a spread-bore to square-flange adapter that someone has drilled to fit
> the WCFB bolt pattern, and then used MULTIPLE gaskets and alot of
> ultra copper to make it work. I found this adapter that looks like it
> has holes to fit the WCFB manifold (
> http://www.spectreperformance.com/#CATALOG.5771 ) but I have to wait
> for California to wake up before I can call and confirm.
>
> Bill M 65
> Coronet 500 'vert


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.