RE: George's engine install & ???'s

[Richard Kinsley <r.kinsley@xxxxxxxxxxxxxxxx>]

ledman_70@xxxxxxxxxxx wrote:
> 
> I've been the same route as George...I pulled a poly and pushbutton and 
> installed a 426 and 4-spd using Schumachers mounts and everything went 
> in fine. They are designed to bolt to a bigblock and 318 K-frame. The 
> trick is the mounts bolt to the BACK side of the engine ears.
=====================================================================
The mounts are on the backside correctly but that doesn't cut it. The 
main issue I have is that I thought this engine was already in this car 
before so why doesn't it fit back in? I do believe the Schumachers are 
what it needs though.



Rich Kinsley  '64 Polara 4 dr 318poly w/goodies


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.