Re: Problem with Neutral Start Switch Set-up
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Problem with Neutral Start Switch Set-up



it does

spigot2039@xxxxxxxxxxx wrote:

>Does it matter that he is using a later model 727 with the 4 speed starter relay?
>
>Gary H.  
>
>-----Original Message-----
>  
>
>>From: Jimmy Peavy  
>>    
>>
>
>  
>
>>The 65 column shift cars don't have a rooster comb.
>>The car should start in neutral, and in park.
>>
>>    
>>
>
>  
>
>>Don Gallimore wrote:
>>
>>    
>>
>>>A 4 speed starter relay does not have a lead for a neutral start 
>>>wire.  Messing with the factory set-up in the other '65 Satellite with 
>>>the original 65 727, it only starts in Park, not neutral.  I guess 
>>>that's correct.
>>>
>>>I think I'll study the discussion in the 62-65 tech section and apply 
>>>those set-up methods.  If I have to drop the tranny pan, so be it.  
>>>Shouldn't lose too much blood (tranny fluid.)
>>>
>>> Akron Don
>>>
>>>Gary wrote:
>>>
>>>      
>>>
>>>>You said that the 4sp relay works just fine.  Is that working so that 
>>>>it only starts in park or neutral.   If so then you either don't have 
>>>>the other switch grounded or it is defective. ---- 
>>>>spigot2039@xxxxxxxxxxx wrote:  
>>>>
>>>>        
>>>>
>>>>>Don,
>>>>>
>>>>>It sounds like the NS Switch is not making proper contact with the 
>>>>>rooster comb. There are some tips at the bottom of 
>>>>>http://www.1962to1965mopar.ornocar.com/transtech.html (#2) that may 
>>>>>provide you a workaround thought or clue, though they are not 
>>>>>specifically for a lever 727.
>>>>>
>>>>>Thanks,
>>>>>Gary H.
>>>>>
>>>>> 
>>>>>-----Original Message-----
>>>>> 
>>>>>   
>>>>>
>>>>>          
>>>>>
>>>>>>I converted my '65 to a later model 727.  Formerly this was a 4 
>>>>>>speed car.  I've installed the correct started relay and ran a wire 
>>>>>>to an original '65 neutral start switch.  I switch out a starter 
>>>>>>relay from a running '65 727.  In both cases, I can not get the 
>>>>>>started to turn in any gear including park or neutral. Put the 4 
>>>>>>speed relay back in and works fine.
>>>>>>
>>>>>>Any suggestions on what to check?  How do you bench test the 
>>>>>>neutral start switch?  Is there difference (besides it's a one 
>>>>>>versus a two or three pin unit) between the later model switch and 
>>>>>>the '65 that is causing me these problems?
>>>>>>
>>>>>>Could the position of the cable setting be just missing the PARK 
>>>>>>pointer on the rooster comb in the case? When I installed the cable 
>>>>>>and adjusted it, I just jambed the tranny in park and locked the 
>>>>>>cable there.  Maybe that's the problem but it seems to hit all the 
>>>>>>gears correctly.
>>>>>>
>>>>>>I'm going to take it to the strip tomorrow for its first run with 
>>>>>>the new Comp Cams and I don't want to be denied. HELP.
>>>>>>
>>>>>> Akron Don       
>>>>>>            
>>>>>>
>>>----
>>>Please address private mail -- mail of interest to only one person -- 
>>>directly to that person.  I.e., send parts/car transactions and 
>>>negotiations as well as other personal messages only to the intended 
>>>recipient, not to the Clubhouse public address. This practice will 
>>>protect your privacy, reduce the total volume of mail and fine tune 
>>>the content signal to Mopar topic.  Thanks!
>>>
>>>'62 to '65 Mopar Clubhouse Discussion Guidelines:
>>>http://www.1962to1965mopar.ornocar.org/mletiq.html. 
>>>
>>>
>>>
>>>      
>>>
>>----
>>Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!
>>
>>'62 to '65 Mopar Clubhouse Discussion Guidelines:
>>http://www.1962to1965mopar.ornocar.org/mletiq.html. 
>>
>>
>>
>>    
>>
>
>
>----
>Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!
>
>'62 to '65 Mopar Clubhouse Discussion Guidelines:
>http://www.1962to1965mopar.ornocar.org/mletiq.html. 
>
>
>
>  
>


[Non-text portions of this message have been removed]



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.