Re: Problem with Neutral Start Switch Set-up

[Don Gallimore <dongallimore@xxxxxxx>]

The "good" car is a '65 floor shifter Satellite.  The "bad" is a '65 B&M 
shifted Belvedere.  The 4-speed starter relay does not have a terminal 
for a neutral start. I've put the automatic tranny relay on the bad car. 

Hmmmm...   Is there a possbility that the tranny doesn't have a roster 
comb? 

Also, I have tested the car as outlined in the 62-65 Tech section and 
did not get the trouble light to glow.  Makes me wonder if the neutral 
start switch in the trannys are different in the later model 727.  The 
one is the car has a 73 date crayoned onto it.

 Akron Don


Jimmy Peavy wrote:
> The 65 column shift cars don't have a rooster comb.
> The car should start in neutral, and in park.
>
>
>
> Don Gallimore wrote:
>
> > A 4 speed starter relay does not have a lead for a neutral start 
> > wire.  Messing with the factory set-up in the other '65 Satellite 
> > with the original 65 727, it only starts in Park, not neutral.  I 
> > guess that's correct.
> >
> > I think I'll study the discussion in the 62-65 tech section and apply 
> > those set-up methods.  If I have to drop the tranny pan, so be it.  
> > Shouldn't lose too much blood (tranny fluid.)
> >
> >  Akron Don
> >
> > Gary wrote:
> >
> > > You said that the 4sp relay works just fine.  Is that working so 
> > > that it only starts in park or neutral.   If so then you either 
> > > don't have the other switch grounded or it is defective. ---- 
> > > spigot2039@xxxxxxxxxxx wrote: 
> > > > Don,
> > > >
> > > > It sounds like the NS Switch is not making proper contact with the 
> > > > rooster comb. There are some tips at the bottom of 
> > > > http://www.1962to1965mopar.ornocar.com/transtech.html (#2) that may 
> > > > provide you a workaround thought or clue, though they are not 
> > > > specifically for a lever 727.
> > > >
> > > > Thanks,
> > > > Gary H.
> > > >
> > > >  
> > > > -----Original Message-----
> > > >  
> > > >   
> > > > > I converted my '65 to a later model 727.  Formerly this was a 4 
> > > > > speed car.  I've installed the correct started relay and ran a 
> > > > > wire to an original '65 neutral start switch.  I switch out a 
> > > > > starter relay from a running '65 727.  In both cases, I can not 
> > > > > get the started to turn in any gear including park or neutral. Put 
> > > > > the 4 speed relay back in and works fine.
> > > > >
> > > > > Any suggestions on what to check?  How do you bench test the 
> > > > > neutral start switch?  Is there difference (besides it's a one 
> > > > > versus a two or three pin unit) between the later model switch and 
> > > > > the '65 that is causing me these problems?
> > > > >
> > > > > Could the position of the cable setting be just missing the PARK 
> > > > > pointer on the rooster comb in the case? When I installed the 
> > > > > cable and adjusted it, I just jambed the tranny in park and locked 
> > > > > the cable there.  Maybe that's the problem but it seems to hit all 
> > > > > the gears correctly.
> > > > >
> > > > > I'm going to take it to the strip tomorrow for its first run with 
> > > > > the new Comp Cams and I don't want to be denied. HELP.
> > > > >
> > > > >  Akron Don       
> >
> >
> > ----
> > Please address private mail -- mail of interest to only one person -- 
> > directly to that person.  I.e., send parts/car transactions and 
> > negotiations as well as other personal messages only to the intended 
> > recipient, not to the Clubhouse public address. This practice will 
> > protect your privacy, reduce the total volume of mail and fine tune 
> > the content signal to Mopar topic.  Thanks!
> >
> > '62 to '65 Mopar Clubhouse Discussion Guidelines:
> > http://www.1962to1965mopar.ornocar.org/mletiq.html.
>
>
> ----
> Please address private mail -- mail of interest to only one person -- 
> directly to that person.  I.e., send parts/car transactions and 
> negotiations as well as other personal messages only to the intended 
> recipient, not to the Clubhouse public address. This practice will 
> protect your privacy, reduce the total volume of mail and fine tune 
> the content signal to Mopar topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html. 


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.