Re: Heater Hose Question

["MO ( Steve Mick)" <micher@xxxxxxxxxxxxxxx>]

My thought is- the hot water feed hose from the engine (pressure side) 
would go to the control valve side of the  heater core. That would prevent 
hot water from going thru the heater core during summer 
months...................................MO
----- Original Message ----- 
From: "Gary H." <spigot2039@xxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Wednesday, December 09, 2009 8:43 PM
Subject: Re: Heater Hose Question


> Not sure it really matters. But I can look on a 1963 Dodge tomorrow.
>
> Thanks,
> Gary H.
>
>
>
> -----Original Message-----
> > I'm ready to put heater hoses on my 63 SF with a 383.  I have never
> > connected the heater, If anyone could explain which hose goes where it
> > would be appreciated.
> >
> > Thanks
> > Dennis C.
>
>
> ----
> Please address private mail -- mail of interest to only one person --  
> directly to that person.  I.e., send parts/car transactions and 
> negotiations as well as other personal messages only to the intended 
> recipient, not to the Clubhouse public address. This practice will protect 
> your privacy, reduce the total volume of mail and fine tune the content 
> signal to Mopar topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.