Re: Flywheel
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Flywheel




good thing I said  "I believe"!!  you learn sumthin' every day.
Mike

----- Original Message ----- From: <chymar01@xxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Wednesday, July 21, 2010 10:05 PM
Subject: Re: Flywheel




The torque converters on cast crank 340's did have a balance weight.
Upon further research, it appears that there were no factory stick 340 cast crank cars. They used a forged crankshaft in that application. Automatic cars got the cast crank. To convert a neutral flywheel for cast crank use, you have to drill a series of holes taking out 4.22oz for a 340, 12.9 for a 383/400/440 and 19.79 for a 360. 440 6bbl cars with the 'heavy' rods used 6.5oz(only in 1970-72). The Mopar Performance Engines book has the layout and sizes for the holes.

If anyone needs a scan of those pages, e-mail me for the .pdf


Mark

----- Original Message ----- From: "Mike and Linda" <miclinmopar@xxxxxxxxxxxxx>
To: 1962to1965mopars@xxxxxxxxxx
Sent: Wednesday, July 21, 2010 8:59:00 PM
Subject: Re: Flywheel


I believe the cast crank 340 were only "eccentric balanced" on the front of
the crank (balancer)....the torque converters and flywheels were neutral
like the steel crank 340s and all 318s. Yes, 360s were counterbalanced at
both ends.
Mike

----- Original Message ----- From: <chymar01@xxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Wednesday, July 21, 2010 8:22 PM
Subject: Re: Flywheel




They are the same for big and small block and thus interchangeable. All
smallblocks except 360's and cast crank 340's are neutral balance. Most
bigblocks are neutral balance with the exception of '71-up 383's, all
400's(except stick cars that have steel cranks) and '73-up 440's(again,
except stick cars) that all use cast cranks.

Mark



----- Original Message ----- From: "Jeff Adams" <ledman_70@xxxxxxxxxxx>
To: 1962to1965mopars@xxxxxxxxxx
Sent: Wednesday, July 21, 2010 6:38:22 PM
Subject: Flywheel


I think I asked this already (old fart's disease), but does anyone have
a 10.5" stick shift bigblock flywheel they'd like to sell? Are big and
small block flywheels interchangeable, and how are the 2 balanced?
Thanks

Jeff Adams
64 Polara



[Non-text portions of this message have been removed]


---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and
negotiations as well as other personal messages only to the intended
recipient, not to the Clubhouse public address. This practice will protect
your privacy, reduce the total volume of mail and fine tune the content
signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and
http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.





---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.




[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.





----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.













Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.