Re: Instrument Panel Removal 1965 Dodge Coronet
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Instrument Panel Removal 1965 Dodge Coronet



There is nothing on the firewall. Just a half circle bracket or collar with 2 nuts on each side holding the column to the dash below the instrument cluster. 
David 

On Nov 12, 2012, at 5:32 PM, Gary Wilson <gwwilson70@xxxxxxxxx> wrote:

No.  Still have to lower the steering column.  No big deal

On Mon, Nov 12, 2012 at 10:54 AM, <dodge440@xxxxxxx> wrote:
I am in the process of removing the Instrument cluster. The service manual says to remove a collar, Top of column?  and then the lower instrument support strap, firewall?  and lower the steering column and tilt the panel outward and disconnect wires and speedometer cable. Then to unscrew the instrument cluster and then the face plate.

My question is can this be done with out lowering the steering column? I have plenty of room as the seats and heaters are out of the car.

If it has to be lowered is the lower support on the firewall.

Jim

1965 Coronet 500, 440 CI

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
 
 
 



--
Gwwilson

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
 
 
 

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
 
 
 


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.