RE: Poly coming out party
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Poly coming out party



Well, I also have to say I e-mailed an inquiry as to how my Intake & VC purchases were proceeding and received a short answer, much to my dismay, of, "What Purchases?"  At the time I elected to let it go because my reply probably would not have been very pleasant.   Maybe its bad record keeping, but, I Do Have My statements for each.  I realized you all had a lot going on and instead of getting all upset I am waiting to see what happens.  All good things come to those who wait!  I pray!!
 
 
 
 
-------Original Message-------
 
Date: 9/21/2014 10:44:53 AM
Subject: RE: Poly coming out party
 

Don’t know of any emails from Ben… I will say that I too was pretty disgusted with how the project went… We had a sample manifold at MATS and then no movement for six months… Finally I knew by July something was rotten in Denmark and as soon as we finished Summer Tour I dragged my wife to California and parked in the parking lot at the foundry for two weeks to finally get some sort of reading… The first day I spent 8 hours porting and polishing manifolds that had been sitting for months… The second day they went to wheelabrator (shot blast) and the third day I hauled them to the machine shop and picked up four sets of valve covers and got them to the polisher and coater for sample treatments.  In the meantime I was informed by a very genuine foundry owner of the details on ‘what happened,’ that the tooling ended up being $5000 more than the first ‘guesstimate’ and there were some very confusing signals coming and is why he parked it til I showed up…

I have now shipped 7 manifolds and two sets of valve covers starting last Thursday… More manifolds will go out Monday and more valve covers will be back from the machine shop about Wednesday… Then 12 more manifolds will be back from heat treat and wheelabrator by Wednesday and go to the machine shop. I should have them the following week where I will take them back to Texas so my wife and I can restart our lives and I’ll be shipping from home base… Once we have reports back from those first manifolds we’ll adjust any concerns and cast another 50…

In reality this project was the dream of enthusiasts who had never undertaken a project of this magnitude before… We are not businessmen but we’ve learned to become businessmen… Every manifold shipped COSTS US $578 and we only charged $399 originally based on some fuzzy math… However, as the manifold gets put on motors we know there will be a huge demand and as we produce 100 at a time our costs then will be able to go down and we’ll be able to make enough to keep the overhead paid and make more people happy…

Thanks for everyone’s patience-especially my wife… If you go watch her foundry tour on our Chrysler Power fb page and see where she’s had to exist for 4 weeks, you’d be glad you weren’t there with your wife… These are all great people!  They do parts for every speed merchant of any repute on the planet-Arias, Donovan, Shelby, BDS, Stage V, Enderle, Good Vibrations and on and on… This is a huge quality project and the proof will be in the pudding… Again, thanks for everyone’s patience and support!  We didn’t do it for ourselves and we can’t do it without you!

Roland

 

 

 

From: 1962to1965mopars@xxxxxxxxxxxxxxxx [mailto:1962to1965mopars@xxxxxxxxxxxxxxxx] On Behalf Of Ray Bell
Sent: Sunday, September 21, 2014 9:33 AM
To: 1962to1965mopars@xxxxxxxxxxxxxxxx
Cc: hemi.parts@xxxxxxxxx; glpavlovich@xxxxxxx; foundryworks1@xxxxxxx; ahlgrimm@xxxxxxxxx; tammy@xxxxxxxxxxxxxxxxx; deaven@xxxxxxxxxxxxxxxxx; tdpeter_23@xxxxxxxxx; elizabeth.darling1@xxxxxxxxxxx
Subject: Re: Poly coming out party

 

While you're there expounding all that's good, Roland... how about answering Ben Simpson's e-mails about his purchase?

 

He's pretty disgusted at the way he's been treated thus far.

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.

 

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.