The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

Fan Clutch for 1960 New Yorker with 413
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look NON-Technical Discussions -> 1955-1961 Forward Look MoPar General DiscussionMessage format
 
rexc
Posted 2018-07-06 3:35 PM (#566136)
Subject: Fan Clutch for 1960 New Yorker with 413


Member

Posts: 20

Dear Gang,

I am trying to replace the fan clutch on my 1960 New Yorker. So far, nothing I have ordered that supposedly will fit is correct. The shafts are either too long or too short. I finally installed the short clutch but it is about 1.5 or 2" from the radiator, which seems too far.

I am sure someone out there knows a correct replacement for the fan clutch and would greatly appreciate any help. The fan clutch that I removed was not ancient, but it had not revealing numbers to help me.

Thanks!

Rex
Top of the page Bottom of the page
Powerflite
Posted 2018-07-06 4:31 PM (#566142 - in reply to #566136)
Subject: Re: Fan Clutch for 1960 New Yorker with 413



Expert

Posts: 4825
2000200050010010010025
Location: So. California
Did you try Rockauto? They have an array of different sizes available. Just measure out the height of your old one to compare to the new one's specs with the "info" button.

https://www.rockauto.com/en/catalog/chrysler,1960,new+yorker,6.7...
Top of the page Bottom of the page
rexc
Posted 2018-07-06 5:00 PM (#566148 - in reply to #566142)
Subject: Re: Fan Clutch for 1960 New Yorker with 413


Member

Posts: 20

Thanks, but none of those they have listed as fitting are correct; they are too long or too short. I love Rock Auto for lots of things, but their info. is not always accurate for the old stuff.

Top of the page Bottom of the page
1960fury
Posted 2018-07-06 5:15 PM (#566150 - in reply to #566136)
Subject: Re: Fan Clutch for 1960 New Yorker with 413



Expert 5K+

Posts: 5581
5000500252525
Location: northern germany
What length are you looking for? The Mopar Performance unit worked for a stock radiator and stock BB in my 1960 Plymouth perfectly. I have a part# for a replacement unit, if you want I can try to find it. Actually I have one of these for sale, but I'm located in Germany.
Top of the page Bottom of the page
b5rt
Posted 2018-07-06 9:21 PM (#566174 - in reply to #566136)
Subject: Re: Fan Clutch for 1960 New Yorker with 413



Expert

Posts: 2439
200010010010010025
Location: central Illinois
Let us know if this works. http://www.forwardlook.net/forums/forums/thread-view.asp?tid=68317&...
Top of the page Bottom of the page
rexc
Posted 2018-07-07 8:32 AM (#566192 - in reply to #566150)
Subject: Re: Fan Clutch for 1960 New Yorker with 413


Member

Posts: 20

I would love to have the part number! Thanks! Rex
Top of the page Bottom of the page
rexc
Posted 2018-07-07 8:37 AM (#566194 - in reply to #566136)
Subject: RE: Fan Clutch for 1960 New Yorker with 413


Member

Posts: 20

Dear All,

I just looked and the Hayden 2947 is the clutch I just installed. It does fit and work, but it is almost 2" away from the radiator which seem a bit too far away. Thanks to everyone for the help!

Best,

Rex
Top of the page Bottom of the page
wizard
Posted 2018-07-07 10:01 AM (#566207 - in reply to #566136)
Subject: Re: Fan Clutch for 1960 New Yorker with 413



Board Moderator & Exner Expert 10K+

Posts: 11635
50005000100050010025
Location: Southern Sweden - Sturkö island
Heres the old thread about the Hayden 2765 (Jaguar) fan clutch. The fan clutch has worked perfectly over the 5 years since installed.
My car is used for active driving, highway, city or cruising.


http://www.forwardlook.net/forums/forums/thread-view.asp?tid=46435&...

Top of the page Bottom of the page
1960fury
Posted 2018-07-07 10:09 AM (#566209 - in reply to #566192)
Subject: Re: Fan Clutch for 1960 New Yorker with 413



Expert 5K+

Posts: 5581
5000500252525
Location: northern germany
rexc - 2018-07-07 8:32 AM

I would love to have the part number! Thanks! Rex


Thermal fan clutch 36952. Hope this helps.
Top of the page Bottom of the page
imopar380
Posted 2018-07-07 11:23 AM (#566212 - in reply to #566209)
Subject: Re: Fan Clutch for 1960 New Yorker with 413



Expert 5K+

Posts: 6774
500010005001001002525
Location: Victoria, BC, on Vancouver Island, Canada
I installed one on my 60 Saratoga last summer, it was off an early 70s Mopar.



(fan.JPG)



Attachments
----------------
Attachments fan.JPG (106KB - 19 downloads)
Top of the page Bottom of the page
R41HP
Posted 2018-07-26 12:30 PM (#567220 - in reply to #566209)
Subject: Re: Fan Clutch for 1960 New Yorker with 413


Veteran

Posts: 188
100252525
Location: Chicago
1960fury - 2018-07-07 9:09 AM

rexc - 2018-07-07 8:32 AM

I would love to have the part number! Thanks! Rex


Thermal fan clutch 36952. Hope this helps.


I have 36952 noted as Four Seasons brand on a box for a Temp-Guard TFC-49 I used.
Interchanges also listed:
Everco A8198
Kool Clutch 115049
Hayden 2705
Murray 271305

Top of the page Bottom of the page
Billohio
Posted 2018-08-21 10:26 AM (#568753 - in reply to #566136)
Subject: Re: Fan Clutch for 1960 New Yorker with 413


Member

Posts: 44
25
I had my original rebuilt at kirkconnel corvette in florida. probably not as cheap as a new one but will fit
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread



(Delete all cookies set by this site)