The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

`60 DeSoto lower lip (trunk area)
Author: Fireflite60 (Show all albums)

Wizard asked for some photos so here we go.
Here is the link for related topic:
http://www.forwardlook.net/forums/forums/thread-view.asp?tid=22360&...

Show Newest Photos First | Show Oldest Photos First7 Photos - Page : [1]


Testing testing... Shown here is the very first version. I wasn`t too happy with this so I made another one using a little more time when hammering. The second version seated very well. No photos yet, I`ll add more when I`ll start welding this together.


Bigger the problem, bigger the hammer...


Stone age tooling. Old chisel was re-used here


Still needs some smoothening on bottom area. Bead roller is needed later to make correct shape for the edge.


"Pre-fabrication" was made with ball head hammer.


Template for the center section. Two different shapes were tested (straight and slighly curved)


Wooden template for RH corner shown. I made 3 templates totally RH-, LH-corners + center section.
 
Show Newest Photos First | Show Oldest Photos First7 Photos - Page : [1]

Return to viewing all photo albums



* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)