Re: IML: 64 Imp wiring problem
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: IML: 64 Imp wiring problem



The connection between the crimp connecter and the wire itself?

David C. Wilker Jr.
USAF (RET)

"I live in the heavens. I reside on mountain tops. I am at constant vigil over thee. I monitor thy righteous ways. Thy levels art mine to command. When thou art in trouble, I will help thee through distorted times. When thou art low, the touch of my hand shall raise thy spirit to the proper level. When thou are too high, I shall terminate thee with a swift stroke of my sword. When thy wires are frayed and broken, my angels shall use solder and iron to heal thee. Thou art the circuit, I am the chosen one, I am the TECH CONTROLLER!"

----- Original Message ----- From: "JAY D'ANGELO" <cadij@xxxxxxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Saturday, October 01, 2005 9:24 AM
Subject: IML: 64 Imp wiring problem



Here is a new problem I hope someone can help me with. Usually, this occurs when I try to start the car for the first time. I turn on the key, the radio plays, but there is no engagement of the starter - like the battery is dead.

I pulled the wire loom connector from the firewall and found the connections dirty and corroded. I cleaned them up, exposing clean metal and plugged it back in and it started.

The next day it wouldn't start again unless I "jiggiled" the wires. Thinking the connectors strill were not making contact, I made new wire connectors about 3 inches long and plugged them in, then tried again. The car started.

The next day, it wouldn't unless I moved the wires around. Once it's running for the day, it will restart.

I'm thinking two things: One of the 3 ignition wires to the connector has a short or something, or the neutral safety switch is shot. A new one is on the way.

What do you think, guys?

Jay




----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm




----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm




Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.