Re: IML: 60 Imperial-starter problem
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: IML: 60 Imperial-starter problem



Cheers for that, better get my order in then. I must have an old catalogue.

Luke

On 3/09/2006, at 7:39 AM, Ernie Stepney wrote:

Gary goers, of course!! Got them for my 58. Just hope you don't want
them yesterday, although I haven't tried getting parts recently maybe
the marriage thing has improved delivery. Oops, maybe not, sometimes
relationships need building more than parts.
Speaking from experience:
Ernie and The Black Bitc_!!





-----Original Message-----
From: mailing-list-owner@xxxxxxxxxxxxxxxx
[mailto:mailing-list-owner@xxxxxxxxxxxxxxxx] On Behalf Of Luke Nola
Sent: Saturday, September 02, 2006 10:31 AM
To: mailing-list@xxxxxxxxxxxxxxxx
Subject: Re: IML: 60 Imperial-starter problem

Hi guys, it's been interesting reading this one. I rebuilt my '60
starter and generator about 5 years ago with a Kanter kit. Bushes,
repaint, zink plated nuts and bolts and some parts. But the core I
had done professionally, I didn't think it cost that much at the time
for the amount of work in it. One thing that has always bugged me is
that none of the reconditioning kits I've seen ever have the rubber
boot for the starter solenoid and I would have thought this is the
first thing they'd reproduce as it's the most likely place to get
water in and cause trouble.
My original one was toast. Has anyone ever seen one for sale? Maybe I
haven't  been looking in the right places but  ten years I've never
seen one for sale.

Luke
60 Le Baron

On 2/09/2006, at 3:28 PM, Tom Scott wrote:


Patrick, thanx for the suggestions...I don't think the pushing
slightly and dropping into park will work...I don't have park.  The
manual says that if you push it about 35 mph it will start by
compression, but hard as I tried I could only push it up to about
27.5 mph and I was real tired after that!!! The bumper jumping
thing scares me because I just had both bumpers rechromed.  Think
I'll stick with the BFH suggestion until I can locate another starter.
Tom
----- Original Message ----- From: <pnkmoore@xxxxxxxxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Friday, September 01, 2006 7:15 PM
Subject: Re: IML: 60 Imperial-starter problem




I have heard and experienced (mostly on GMs) that stop-and-go
erranding can increase the heat in large-block cylinders and
expand the piston rings.  A symptom I watch for as an indicator of
an aging starter or battery is when the car fails to start when
you've made a bunch of stop-and-go starts, but behaves normally
once the engine cools a few moments (and the rings contract).

With respect to forceful pursuasion methods on starters, one we
use frequently here in the flatlands (and one that I employed just
this week when my '69 Buick starter Bendix became reluctant) is to
open the car door, drop the transmission into neutral and push
with your foot to make the car move a little.  While it's moving,
even a tiny bit, you drop the transmission back into park and the
force of the transmission locking can jar the starter back into
action.  Often you can actually hear it release. I've had cars
that each want a different method of releasing a captured
starter.  I've jumped up and down on the rear bumper of fords and
the front bumper of my Cadillac.  I had three late 70s/early 80s
Mercedes diesels that would only respond to a sharp rapping on the
starter when they got stuck, a very inconvenient problem when
you're in a suit.  And you haven't lived until you're out with
your boss for lunch and had to jump on the bumper to release your
starter.  My '76 Cadillac provided that memory for me, that being
the day before I went out and bought a new starter.  Plainly,  I'm
cheap and waited too long.

My '70 300 with its gear-reduction starter never gave me that type
of trouble.  It had plenty of other problems and never ceased to
drive me insane, but the starter always performed well.  I
sometimes called that car "tough love" or worse, depending on what
on-board system was failing me at the moment, yet of all the cars
I've owned and sold, I miss the 300 the most.

Patrick
'58 Southampton project
'69 Electra ragtop w/ "Wildcat" rims
'86 Merecedes 300 SDL (my daily, 237K miles and counting!)
'04 Honda "mini-man" (her daily)

.

----- Original Message ----- From: "Tom Scott" <shelbyguy@xxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Thursday, August 31, 2006 4:37 PM
Subject: IML: 60 Imperial-starter problem




I was out tooling around in my 60 Crown today running a few
errands.  It was cool today, temp right around 70F.  The car ran
perfectly throughout the day until the last stop.  I ran into the
local WalMart to pick up some film I had developed and when I
came out, she was dead.  The temp gauge never moved more than 1/3
of the way to hot the whole day.  I had stopped, parked and
restarted the car 4 times within a span of about 20 minutes and
had driven maybe 6 miles or so.  When I turned the key to start,
nothing happened at all.  I ran through the pushbuttons figuring
maybe the neutral switch was hung up or maybe the pushbuttons
themselves.  Everything electrical worked at normal
speed...windows, wipers, etc.  Dejectedly, I hoofed it on
home...fortunately I was only a mile or so from home.  About an
hour later I went back to the car, turned the key and she started
right up.  The starter spun at normal revolutions.
Anybody got a clue as to what might have happened?  I'm thinking
either the starter or solenoid overheated but starting the car 4
times in a half hour or so shouldn't overheat them.
There is no corrosion on either the battery or the starter.
Thanx
Tom
60 4 dr Crown Southampton

-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm








-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm




-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm







-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm



-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm






-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.