Re: IML: Rotors - Do Not Turn

[Kenyon Wills <imperialist1960@xxxxxxxxx>]

--- mopar413@xxxxxxxxxxx wrote:

> I have to disagree with you as far as the rotors not
> being turnable.  Usually they can be turned,  There
> is a number that they can be turned down to.  I have
> never heard of not being able to turn rotors as long
> as they meet specs.  
> 

Check the specs, which are in the FSM.

Says very explicitly REPLACE, DO NOT TURN the rotors
at all in the FSM.




> 
> -----------------  http://www.imperialclub.com 
> -----------------
> This message was sent to you by the Imperial Mailing
> List. Please 
> reply to mailing-list@xxxxxxxxxxxxxxxx and your
> response will be 
> shared with everyone. Private messages (and
> attachments) for the
> Administrators should be sent to
> webmaster@xxxxxxxxxxxxxxxx
> To UN-SUBSCRIBE, go to
> http://imperialclub.com/unsubscribe.htm
> 
> 



-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm