FW: Re: IML: Softwater vs 'my water'!
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

FW: Re: IML: Softwater vs 'my water'!



 
 
-------------- Forwarded Message: --------------
From: sosmi@xxxxxxxxxxx
To: <dansgarage@xxxxxxxxxxxx>
Subject: Re: IML: Softwater vs 'my water'!
Date: Sun, 03 Dec 2006 15:39:15 +0000
Dan, Thanks, we're all great here. When it comes to Christmas shopping, I leave that to the professionals, Wife, and daughters.I just PAY for it! As for the water subject, I can relate to GOOD tap water, Detroit had water so good, we used it in batteries, and cooling systems. When I moved to FL. I tried that with my well water, after a few batteries, and radiators, I learned my lesson.Now nothing but distilled goes in. If you don't want to mess with mixing, just buy the pre-mix coolant (50-50) and go.One of the reasons why you want de-mineralize water in your cooling system, is there are always hot pockets in the cooling system, particularly in the cylinder heads. When the mineralized water is super heated, the minerals "drop-out" of suspension, and remain on that surface.This reduces the heat transfer even more. The other important factor, is many different minerals promote electrolytic current with-in the cooling system.A battery, in simple terms, this affects many comp onents in the cooling system. Don't forget all the metals, copper,brass, tin, lead, steel, aluminum, cast-iron, etc.It's the same reason you clean you automatic coffee maker.Hope this helped, Ya'll have a nice day, Dave
-------------- Original message --------------
From: <dansgarage@xxxxxxxxxxxx>

> Hi Dave...how are you doing these days??....all done with the Christmas shopping
> of course!?...I have been folowing the thread regarding 'flushing' the cooling
> system and while most comments about using Cascade to clean out the system
> itself seem to agree that it works fine. I am wondering about adding the water
> to the antifreeze when the time comes (after flushing out) to refill the cooling
> system with some kind of an anti-freeze/water mixture. I was wondering is its
> really a MUST to add 'distilled' water to the antifreeze instead of using water
> right from the tap.......THE REASON I ASK THIS is that when I was living back in
> the NY/NJ area the water we got out of the public drinking system was actually
> really good! It wasn't HARD or SOFT water and , if I remember right, the PH was
> just about perfect for when I was keeping a freahwater fish tank...I didn't have
> to do anything at all to the water to change the PH! Now, having said that, here
> in southern California the water is TERRIBLE!....extremely high mineral content
> (and tasts terrible! thats way you always see photo's of Californians walking
> around with plastic bottles of water, I guess, no one wants to drink what comes
> out of the faucet unless they have to! So, anyway, when mixing WATER with
> ANTIFREEZE does it matter much if I use TAP water or DISTILLED water??? Since
> this was brought up, I just thught I'd ask what your experience's may or may
> not, have been so far?!!!
> Thanks bunches!!!
> Dan Melnik
>
> ---- sosmi@xxxxxxxxxxx wrote:
>
> =============
> Clay, the Cascade flush works, and we've been doing it f or a long time, however
> the softened water has salts, and other chemicals added to it, thats great for
> washing your hair, and dishes, but its not good for cooling systems. Distilled
> water should not have any minerals in it which makes it perfect for batteries,
> and cooling systems.The cooling system already has enough problems, why
> introduce more? Ya'll have a nice day , Dave.
>
> -------------- Original message --------------
> From: "Clay Smith"
>
> When I flushed the cooling system of 60 Custom I used a tablet of Cascade
> dishwasher detergent. I probably should have used two tablets. No suds and
> seemed to clean everything well.
> Also per a tip from Skinned Knuckles magazine I used SOFT water not Distilled
> to mix with the antifreeze. According to the magazine distilled water is just
> fine for batteries ,but will promote corrosion in a cars cooling system .
> Your results may vary
> Clay Smith
> 60 Custom
> 67 Crown Coupe
> ----- Original Message -----
> From: William Miller
> To: mailing-list@xxxxxxxxxxxxxxxx
> Sent: Saturday, December 02, 2006 12:29 AM
> Subject: IML: Tide
>
>
> Kenyon,
> You have your soaps reversed. Dishwasher
> soap makes almost no suds and is stronger than laundry soap. Suds are for the
> lady of the house to see and think she is washing good. The new front load
> washers use HE soap which makes almost no suds.
> In case some one runs out of dishwasher soap and throws in some Tide instead
> you will have the floors in half the house mopped before you are done. Stop it,
> pour in some cooking oil and start it up. The oil will kill the suds and let you
> get back to mopping.
> Bill Miller
> 68 Crown dry HT (Imperial content)
< / body>


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.