IML: Master cylinder gasket 67 Imperial
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

IML: Master cylinder gasket 67 Imperial



Anyone have a lead on a Master cylinder gasket for my 67 Imperial with front disks? Mine has a small tear in it and can't seem to find it at auto stores.

Thx,
Chris
----- Original Message ----- From: <mopar413@xxxxxxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Friday, December 08, 2006 9:05 AM
Subject: IML: Hub removal


Spay a little WD or simaral stuff on the shaft and apply pressure with your puller. Then wack the end of the puller fairly hard a couple of times. Heat will help also but try first without the heat.


-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm




-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.