RE: IML: am at my wits end
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: IML: am at my wits end



STOP ! you require a special tool for this job as i found out myself, and had one made up..
there is a step by step guide on the subject matter. try searching the web for it.  


best wishes, steve.



From: fljoslin@xxxxxxxx
To: mailing-list@xxxxxxxxxxxxxxxx
Date: Thu, 7 Dec 2006 22:13:45 -0500
Subject: Re: IML: am at my wits end

Have you tried a hammer?
It is amazing what you can do with a 2-3 lb sledge hammer in the right place.

----- Original Message -----
From: "Mark Battesby"
To: mailing-list@xxxxxxxxxxxxxxxx
Subject: IML: am at my wits end
Date: Thu, 7 Dec 2006 15:24:21 -0800 (PST)

Hey guys I own a 1961 imperial .I also own a 47 desotto. I have been trying to get the rear hub off the driver side wheel . I bought a heavy duty puller and it wont budge . I have never seen anything like this happen before I even used a 5 foot breaker bar and all I can get is the whole wheel spins slightly . I feel like I am breaking something what should I do


Fred Joslin



Be one of the first to try Windows Live Mail.

Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.