Re: IML: Floor Pan Coating

[Kenyon Wills <imperialist1960@xxxxxxxxx>]

Go to your local auto body paint supply house.  They
sell it in aerosol cans or with a special applicator
for compressed air for larger jobs.

The spray cans should be fine for what most here will
be doing.

It's called "undercoating" and works under the car as
well.


-Kenyon


--- JIM LORENZEN <jdlpdx@xxxxxxxxxxx> wrote:

> Hi all  -
> Can anyone tell me what is the composition of the
> coating that was factory applied to the interior
> floor pans of the '60, '61, '62, ? Imperials?  I
> think it was also used on the inside of the doors. 
> I'm going to be cutting some pieces to repair the
> floor pan of my '62 and wanted to match the coating
> when I was done and also didn't want to be surprised
> with a fire in the donor car when I cut the needed
> sections out of it.
> Thanks in advance -
> 
> Jim L. in OR
>     '60 Crown 4dr Southampton
>     '62 Crown 4dr Southampton



      ____________________________________________________________________________________
Fussy? Opinionated? Impossible to please? Perfect.  Join Yahoo!'s user panel and lay it on us. http://surveylink.yahoo.com/gmrs/yahoo_panel_invite.asp?a=7 



-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm