IML: Exhaust Picture Needed/ Reverse Button Not Engaging When Engine is
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

IML: Exhaust Picture Needed/ Reverse Button Not Engaging When Engine is Hot



Fellow Imperialists,

I wanted to clarify that when the engine is hot, the Reverse button will 
not engage.  I push the Reverse button, and it will go in, but the 
Neutral button does not pop out. Also, the transmission does not shift 
gears; it stays in neutral.  Now, with both Neutral and Reverse pushed 
in, if I push the Neutral button, the Reverse button pops out.  Now in 
Neutral, if I try to shift into any other gear, it works correctly.  The 
button goes in, Neutral pops out, and the transmission shifts gears.

If the engine is cold, the push buttons work as they are supposed to. 
Reverse pushes in, Neutral pops out and the transmission shifts into 
reverse.

Thanks,
Graham Quimby
62 Caramel Crown 2 Dr Hardtop



-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to iml.webmonster@xxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.