IML: Valve cover gaskets and valve guide seals

From: mrs954@xxxxxxx
Date: Fri, 16 Nov 2007 13:24:19 -0500

Hi Group,
I plan to replace the valve cover gaskets on my 64 LeBaron this weekend. I have a small oil leak on one side so I thought I'd replace both gaskets. I'm also contemplating replacing the valve stem seals while I have the valve covers off. My question is, do I need to remove the heater core housing in order to remove the right side valve cover and valve springs? I could probably get the valve cover off, but I may not be able to get the spring compressor onto the valve springs on #8 cylinder. Any ideas or suggestions?

Thanks,
Mark Souders
Gettin' cold in Mohrsville, PA

Email and AIM finally together. You've gotta check out free AOL Mail!

Follow-Ups:
- RE: IML: Valve cover gaskets and valve guide seals
  - From: dave brown

References:
- IML: 1955 Parts in Iowa
  - From: Kenyon Wills

Prev by Date: IML: 1955 Parts in Iowa
Next by Date: RE: IML: Valve cover gaskets and valve guide seals
Previous by thread: IML: 1955 Parts in Iowa
Next by thread: RE: IML: Valve cover gaskets and valve guide seals
Index(es):
- Date
- Thread

Back to the Home of the Forward Look Network

Copyright © The Forward Look Network. All rights reserved.
Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.