Re: IML: 1956 Imperial Choke setting
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: IML: 1956 Imperial Choke setting



I would initially set it so that it is just fully closed when the car is totally cold. Then start the car and watch to see if it opens. 

What happens after that will determine your next course of action.

Paul

In an email dated Sat, 4 12 2004 1:38:40 am GMT, "Tim Hulse" <timhulse@xxxxxxx> writes:

>Hey everyone,
> I installed the heat tube that goes from the exhaust manifold to the choke on the carb. What is the easiest way to set the choke with carb on the car? I can't seem to get it just right. I cant afford to get a mechanic to do it plus I don't trust them. Spend money and get same result.
>
>Thanks
>Tim
>1956 Imperial
>354 Hemi Carter 2314S carb.
>


-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.