[FWDLK] Floating Power Conversion Mounts

[<SC68Cuda@xxxxxxx>]

Hi All,
    Finally have some firm information on the conversion mounts for the
"Floating Power" engine mounts, which I (late one night) nicknamed "Harnessed
Power" mounts, after looking at a pile of failed originals on my workbench.
Not to say that the originals were not a superior design for the time, just
that our friends at the old Chrysler Corporation probably never envisioned
such huge interest in these cars 40 years in the future... and that 40 years
later these monsters would still be running, much less seeing duty as daily
drivers, racers, show cars, museum pieces and the like... and still making
enough power to tear up engine mounts!
    At any rate, these conversions are intended to replace the originals in
cars that see regular driving or severe duty.  They do not appear as the
originals, but are much less expensive than originals, replacements, or
repair of originals.  In addition, they are easily serviceable in the event
of an insulator failure, the insulators are readily available, and should
continue to be available for a long time to come.  This leaves the good
originals, and repaired parts for those wishing to maintain original
appearance.
    The conversion mount kit consists of the 3 piece set, and all fasteners
for one side of the engine.  The mount is designed to use the readily
available 1972-1978 Dodge Truck engine insulator.  The upper and lower
brackets are fabricated of new steel and are powder-coated black.  Specify
left or right side, and long or short wheelbase, unless ordering a pair.
Pairs are simply reversed to fit either long or short wheelbase.  The
1979-1993 insulators feature built in strain relief, and are available for an
extra $6 per side.  See the web page for a visual comparison of the
insulators before ordering.   You can use this link, <A
HREF="http://members.aol.com/impsvcs/harnpow.htm";>Harnessed Power!</A>  or
type in this address:  http://members.aol.com/impsvcs/harnpow.htm
    List price is $60 each.  An introductory price of $50 each is offered to
members of the Imperial, 300, '62-'65 and Forward Look lists until March 1st,
2000.
    Please contact me at IMPSVCS@xxxxxxx if you have any questions.
    Orders can be sent to:  Imperial Services, P.O. Box 802, Mount Morris, MI
 48458-0802.  Please include a check or money order, and add $5 shipping for
each mount.  I am not currently able to take credit card orders.  Parts will
ship in 1-2 weeks - let me know if you are in a rush, and if paid by Money
Order, I'll ship as soon as possible.
    Please feel free to call me at my home if you have additional questions
or concerns... my number is 517/652-6309.  Leave a message, and I'll return
your call asap.

Thanks again for all the support and interest,
Steve Charette
Imperial Services

P. S.  One last thing - the replacement mounts should be ready soon (after
many delays).  I'll keep you posted!!   See <A
HREF="http://members.aol.com/impsvcs/flopower.html";>1960-1966 Chrysler
Imperial</A>  or  http://members.aol.com/impsvcs/flopower.html