[FWDLK] FW: left vs right
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[FWDLK] FW: left vs right



Paul and others....
Here is an excellent page regard the 8-3/4 Mopar rear ends:

http://www.moparmecca.com/tech_abody_834.asp

Enjoy...

George


----------
From:   The Holmgren's
Sent:   Tuesday, October 16, 2001 2:15 PM
Subject:        Re: left vs right

James Wilson wrote:
>
> Another nice thing about the rearend-- a few years ago
> I blew a posi (yea I know thats the GM term) on a 73 Dodge
> 1/2 ton and found that the 57-59 maybe later will fit so
> using that I would assume that the 3rd member out of the
> pickups of that era would fit our fin cars
> Jim

3 years ago I re-discovered my spare 57 rearend. Since it was about
time for that particular piece to be done for my resto project
I dug it out. A little effort expended and my brain woke up to the
fact that that unit was a suregrip. I had removed it from a 57
NewYorker 4dr back in 75 and stored it away.
Took it to a real good 8-3/4 expert and had him go through it
and prep it for my finishing it up for my 300-C.
He had (demanded) me see what I had brought him before he completed
the job.  I had a 57 housing (tapered axles and all) with a 1970
suregrip center section in it. I KNOW the car I took the
assembly out of. Junked it myself back in 75, bought it for a
few spare parts and sold the running motor to a bud.
(that project was a real humdinger, and another story for some
other time)

SO, the thing here is it is possible that ANY 8-3/4" center section
should work in ANY vintage 8-3/4" housing.


--
Paul Holmgren
Hoosier Corps #33, L-6
2 57 300-C's in Indy



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.