[FWDLK] 12 Volt Conversion.. Almost done

[Josh Ackerman <josh@xxxxxxxxxxxxxxxxxxxxx>]

 Well, Everything is done and I took a ride last night. Everything seems to
be working just fine. The best part is that I didn't need to make a bracket.
The Delco alternator hooked right up after I just turned the existing
bracket around and bolted it back up.  It is VERY secure and wont even
budge. At first my car wouldn't turn over, but it turned out to be that the
coil wires needed to be reversed.  Then she fired up like a shot.
 The only concern I have is my temp gauge.  It seemed to be doubled so I
will put a reducer on it tonight. None of the other gauges seem to be
affected, but I will probably put reducers on the fuel gauge as well.
 I don't plan on using the radio, so I took out the fuse and removed the
tubes from the back, so that we didn't have any accidents and fry it.

Josh

-- -- -- -- -- -- -- --
Calendars are still available.  Don't miss the chance to get yours now!
Details for ordering may be found at:
http://www.forwardlook.net/calendar2002/index.html