[FWDLK] Overheating Problem

[George Sazdoff <Scavengers58@xxxxxx>]

Lou,  You can check coolant flow quite simply also to verify that you are
getting good circulation.  Start with a cold engine....open hood, remove radiator
cap, start engine, observe water through cap opening while the engine becomes
warm enough for the thermostat to open.  You should see the coolant moving in
the radiator.  You can pick the engine rpm up a bit to be sure the coolant is
moving.  This is a simple way of checking both flow, and the thermostats
performance.  This will rule out a flow problem.  Hope this helps,  George.