Re: [FWDLK] Question for the list.....
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] Question for the list.....



I have a factory A/C car that had undercoating AND and under hood pad. So at least one A/C I know of (snicker snicker!) has enough to hold truth to the story.
 
----- Original Message -----
Sent: Monday, May 03, 2004 6:46 PM
Subject: Re: [FWDLK] Question for the list.....

The factory undercoating was a miserable hot tar substance that would have been very difficult for a dealer to apply (they'd have to remove all of the interior for one thing).  I chipped 4 coffee cans of it out of my Savoy-vedere's interior alone.
 
Undercoating was also done as a sound deadener, so it would make sense that hood insulation (a noise suppressor) would be installed on undercoated cars.
 
I have been told that all of the a/c equipped cars came with the hood insulation to help quiet the racket of the compressor as well.
 
Can't positive confirm either though.
 
-Dave
----- Original Message -----
Sent: Monday, May 03, 2004 7:38 PM
Subject: Re: [FWDLK] Question for the list.....

I thought undercoating was done at the dealership and not at the factory?  If this is true then the hood pad theory isn't accurate.
Mike
----- Original Message -----
From: Ron Waters
Sent: Monday, May 03, 2004 7:24 PM
Subject: Re: [FWDLK] Question for the list.....

I don't understand the relationship between one and the other.  What makes you certain of this ?
 
Ron
----- Original Message -----
Sent: Monday, May 03, 2004 4:23 PM
Subject: Re: [FWDLK] Question for the list.....

 
----- Original
 
Only those 57 and 58's with factory undercoating had hood pads.
David Wallace
58 Fury
 
 
From: Ron Waters
Sent: Monday, May 03, 2004 5:25 PM
Subject: Re: [FWDLK] Question for the list.....

Mike -
 
I would use Permatex Clear RTV Silicone Adhesive.  And, yes, 57-8 Plys did have a hood pad.
 
Ron
----- Original Message -----
Sent: Monday, May 03, 2004 9:18 AM
Subject: [FWDLK] Question for the list.....

Bought the under hood insulation pad for my 57 Plymouth from Gary Goers.....What kind of adhesive will work in this situation?
Thanks in advance.............Mike



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.