Re: [FWDLK] Start me UP
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] Start me UP



Neil,

The neutral safety switch is doing exactly what it is supposed to do,
prevent the starter from running except when in neutral.

My guess is the ignition key is stuck in the "start" position (happened to
me once on another brand car). When the transmission is in "Neutral", then
the neutral safety switch grounds and completes the circuit to activate the
solenoid on the fender. Other possibilities: a. A wiring harness short
activating the "start" wire from the ignition switch to the solenoid. B. An
internal short in the solenoid. C. An internal short inside the ignition
switch.

I would start trouble shooting by wiggling the ignition key to see if the
starter stops. Next, disconnect the "start" wire at the solenoid (be careful
not to ground it out!). If the starter still runs when in neutral, it is the
solenoid. If the wire still has 12 volts in it, the problem is in the wiring
or ignition switch.

Dave Homstad
56 Dodge D500

-----Original Message-----
From: Forward Look Mopar Discussion List
[mailto:L-FORWARDLOOK@xxxxxxxxxxxxx]On Behalf Of eastern sierra Adj Services
Sent: Tuesday, May 25, 2004 10:52 AM
To: L-FORWARDLOOK@xxxxxxxxxxxxx
Subject: [FWDLK] Start me UP

A question has arisen, as to how to fix a situation where  pushing the N
(eutral) button will engage the starter, while the engine is
running--not a fun experience--is it just a matter of  replacing the
neutral starter switch, or something else?

Neil V.



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.