Re: [FWDLK] Oil Pump Priming Tool
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] Oil Pump Priming Tool



The screwdriver-blade end is the end of the distributor, which sets in the oil pump drive gear and driveshaft. You'll have to pull the pump gear/driveshaft first, and then you'll see the hex hed end which is on the oil pump itself.  (Take a look at the picture I sent you earlier and you'll see what I mean)

-Dave

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.