[FWDLK] Brake Lines Leaking
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[FWDLK] Brake Lines Leaking



Grrrr ! The brake line that runs from the master cylinder to the 4-way
connector on the left frame rail is leaking at the connector. It leaks from
the top of the cad plated connection, where the brake line goes thru. Since
this was discovered, here's what I've done:

*Bought a new, quality double flare tool (KD2199) to replace my old one.

*Created two identical lines as the one that was leaking. Double flared the
ends. Swapped out the initial line for one then the other. Followed
instructions on how to double flare brake line to the letter. I have a fair
amount of experience doing this as well.

*Swapped out the connector with another identical one.

None of the above has solved the problem.

Any thoughts ?

Ron

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.