Re: [FWDLK] Convertible Top Latches

[Jack Johnson <johnaire@xxxxxxxxxxxxxxx>]

Ron,
   On my 55 Plymouth, I removed the little stainless steel wind deflectors
from the 2 front doors to have the car body work done and repainted.  They
were attached with rivets that were rusting.  I obtained some stainless
steel rivets and they worked out well and did not rust as the originals.
I'm not sure if the rivets you are talking about are of the same kind, but
if they are, I'd get some stainless steel ones.  I got mine from a friend
that had a metal shop.
Jack  in Shinglehouse, Pa


----- Original Message -----
From: "Ron Waters" <ronbo97@xxxxxxxxxxx>
To: <L-FORWARDLOOK@xxxxxxxxxxxxx>
Sent: Wednesday, April 26, 2006 11:25 PM
Subject: [FWDLK] Convertible Top Latches


> Hi Everyone -
>
> I have to get my 57-9 convertible top latches rechromed. Disassembly
> involves removing a pin and grinding off a long rivet. Has anyone done
this
> and if so, where did you find the rivet to reassemble ?
>
> Ron
>
> *************************************************************
>
> To unsubscribe or set your subscription options, please go to
> http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
>
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.385 / Virus Database: 268.5.0/325 - Release Date: 4/26/2006
>
>

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1