Re: [FWDLK] 1955 Plymouth/Dodge V8 Oil Filter Bolt Torque Spec
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] 1955 Plymouth/Dodge V8 Oil Filter Bolt Torque Spec



Jason,

On 515 it says 25 Foot-Pounds

Jim Hoekendijk
The Netherlands
'57 Dodge D-500 x2


-----Oorspronkelijk bericht-----
Van: Forward Look Mopar Discussion List [mailto:L-FORWARDLOOK@xxxxxxxxxxxxx]
Namens Jason Rogers
Verzonden: donderdag 29 juni 2006 13:45
Aan: L-FORWARDLOOK@xxxxxxxxxxxxx
Onderwerp: [FWDLK] 1955 Plymouth/Dodge V8 Oil Filter Bolt Torque Spec

Greetings:

I received a call asking what is the torque spec for the oil filter bolt
on the V8 engine?  This would be the bolt that holds the lid onto the
canister in which the replaceable element sits.  Neither I nor the
caller have seen the info in the service manual.

A gut-guess would be 30-35 ft-lbs.

Thanks,
Jason.

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.